Cryogens
- Pest Management
- Fire Plan Review and Inspection
- Building Codes Enforcement
- Chartfield Form Codes Permits
- Temporary Structures on Campus – Including Tents
- Plan Submittal Guidelines
- Permit Instructions
- Permit Application Process
- Inspections
- Code Permit Fee Schedule
- Applicable Building Codes for the State of Florida and the University of Florida
- Certificate of Occupancy or Completion
- ADA Assessment
- Building Emergency Coordinators
- Risk Management Insurance & Liability
- Occupational Medicine
- Industrial Hygiene & Occupational Safety
- Ergonomics
- Drones/UAS
- Boating & Dive Safety
- Report Lab Closeout
- Radiation and Laser Safety
- Hazardous Waste Management
- Gator TRACS
- Chemical and Lab Safety
- Chemical Safety Information
- Signage
- Standard Operating Procedures
- Signage & Stickers
- Safety Surveys
- Peroxide Forming Compounds
- New Labs, Moving Labs & Closeouts
- Minors and Visitors in the Lab
- Lessons Learned
- Lab Ventilation & Fume Hoods
- Lab Safety Manual
- Hydrofluoric Acid
- First Aid Kit Info
- Equipment Purchase Approval
- Equipment Decontamination
- Cryogens
- Controlled Substances & Pharmaceutical Products
- Compressed Gas
- Chemical Storage and Management
- Chemical Spills
- Chemical Inventory
- Chemical Hygiene Plan
- Chemical Exposures
- Acids That Deserve Special Attention
- Biological Safety
- Vaccination for Research Personnel
- Shipping and Transport of Biological Materials
- Select Agents
- SARS-CoV-2/COVID-19 Specimen Research
- Research Involving Flying Insects
- Recombinant & Synthetic Nucleic Acids
- Plant Research & Greenhouses
- NIH Guidelines Flowchart
- BloodBorne Pathogen Program
- BioPath Program
- Biological Spills
- Biohazardous Waste Disposal
- Biohazard Project Registration
- Autoclaves
- Acute Biological Toxins
- Animal Research Safety
A cryogenic liquid is defined as a liquid with a normal boiling point below -240°F (-150°C, 123°K). The most commonly used industrial gases that are transported, handled, and stored in the liquid state at cryogenic temperatures are argon, helium, hydrogen, nitrogen, and oxygen. There are a number of general precautions and safe practices that must be observed because of the extremely low temperatures and high rates of conversion into gas of all the cryogenic liquids. There are also specific precautions that must be followed where a particular liquid may react with contaminants or may present other hazards associated with that particular product such as asphyxiation or flammability.
As always, end users should have and be thoroughly familiar with the SDS for their specific product. All operators must be familiar with the instructions provided with the equipment to be used with the cryogenic liquid.
Hazards
- Extreme cold: can cause instant extreme frost bite to exposed skin or eyes.
- Asphyxiation: can immediately displace oxygen, especially in poorly ventilated areas
- Expansion: cryogens, such as liquid nitrogen, can expand up to 700x when changing from liquid to gas. Rapid changes in temperature can result in tank or vessel explosions.
Minimum PPE
The required apparel and PPE for handling cryogens include:
- Full face shield over safety glasses
- Long sleeve shirt or lab coat
- Loose fitting thermal insulated or leather gloves (these are not the same as heat gloves!)
- Pants without cuffs that can trap liquid next to your body.
- Closed toe shoes that cover the entire foot.
Training
EH&S offers a recommended Liquid Nitrogen Training found on MyTraining under the course code UF_EHS866. The course covers the following topics:
- The hazards associated with liquid nitrogen,
- Parts of a liquid nitrogen tank including the safety features,
- Safely dispensing liquid nitrogen and handling cryogenic tubes,
- Safely transporting liquid nitrogen within a building,
- Other cryogenic liquids requiring additional safety considerations.
